No mistakes

It is unequal for guests to own a defective product, which will cause many troubles. A good quality GB0-381-ENU test engine can be important for candidates. Students must learn the correct knowledge in order to pass the GB0-381-ENU exam. About this question, our company sets a good example. We clearly know that the unqualified GB0-381-ENU exam guide will have a bad influence on our company's credibility. So we have invested a lot of energy to ensure the quality of the GB0-381-ENU training material. On the one hand, we have special proof-reader to check the study guide. Once there are errors in our H3CSE-Routing & Switching training vce, our staff will instantly modify. On the other hand, we have complete and strict procedure for staff to follow. So mistakes couldn't exist in our GB0-381-ENU cram material. You can look through our free demo before purchasing.

Unlimited install

Our GB0-381-ENU online test engine is very powerful for its installation. Can you imagine the practice exam can be installed on many devices? It will be a magical experience. Technology enables impossible things become true. Like windows, mobile phone, PC and so on, you can try all the supported devices as you like. The installation process of the GB0-381-ENU valid practice can be easy to follow. So you can quickly start your learning. Our H3C training material dedicates to take the forefront in this industry and has some advances. So we always try some new technology to service our customers. If you look forward to experience more fresh learning ways of our H3C Large-Scale Routing Network Technologies V2.0 real test, just keep close attention to us. We will create more and more good products by using the power of technology.

After purchase, Instant Download: Upon successful payment, Our systems will automatically send the product you have purchased to your mailbox by email. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Reasonable price

Normally, price is also an essential element for customers to choose a GB0-381-ENU practice material. People usually like inexpensive high-quality study guide. So our GB0-381-ENU test engine will meet your needs because our price is much lower than others. Our company creates a high effective management system, which cuts a large amount of expenditure. In this way, we can sale our GB0-381-ENU practice pdf in a nice price. Our goal is to make our H3CSE-Routing & Switching GB0-381-ENU exam cram access to every common person. They are thirstier to success. If we can aid them to live better, we just do a meaningful thing.

A wise choice is of great significance to a triumphant person. Sometimes, some people are just on the wrong path but never find out. Only the failures can wake them up. In short, our GB0-381-ENU training material is able to instruct you to step forward as long as you practice on our GB0-381-ENU test engine. Do not make excuses for yourself. You do not have too much time to hesitating. An ambitious person will march forward courageously. Actually, the gap between the successful people and common people is because different levels of efforts. Come to learn our GB0-381-ENU practice torrent. Life is too short to wake up in the morning with regrets.

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. As shown, 4 routers are connected to one Ethernet link. The router interface is of broadcast network type, DIS election has been carried out and adjacency has been established. If the RTA restarts at this time, after the restart, the DIS on this link is ______.

A) RTC
B) RTB
C) RTA
D) RTD

2. Among the following states of the OSPF protocol, the ones that do not belong to the stable state are ________.

A) Init
B) Loading
C) 2-waC
D) Attempt

3. There are a lot of static routes with tags 100 and 200 on the RTA. RTA and RTB run OSPF routing protocol, and RTB needs to learn all static routes on RTA. At the same time, it is required that on RTB, the priority of the route with tag 200 is 200.
If the above requirements are fulfilled, which of the following configurations is correct?

A) RTA configuration: ospf import-route static RTB configuration: route-polic2 permit node 10 if-match tag 200 ospf preference ase route-polic2 200
B) RTA configuration: route-polic1 permit node 10 if-match tag 100 appltag 100 route-polic1 permit node 20 if-match tag 200 appltag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if-match tag 200 ospf preference ase route-polic2 200
C) RTA configuration: route-polic1 permit node 10 if-match tag 100 route-polic1 permit node 20 if-match tag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if- match tag 200 applpreference 200 ospf preference ase route-polic2 150
D) RTA configuration: route-polic1 permit node 10 if-match tag 100 appltag 100 route-polic1 permit node 20 if-match tag 200 appltag 200 ospf import-route static route-polic1 RTB configuration: route-polic2 permit node 10 if-match tag 200 applpreference 200 ospf preference ase route-polic2 150

4. The role of IP Internal ReachabilitInformation CLV in IS-IS packets is ______.

A) Carry the IP address information of the IS-IS interface enabled
B) Area code carrying IS
C) Carry IP prefix information, that is, IP routing information
D) Carry the Stem-ID information of IS

5. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA-LoopBack0] ip address 1.1.1.1 255.255.255.255
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1]import-route direct
RTB-LoopBack0] ip address 2.2.2.2 255.255.255.255
RTB]ospf 1
RTB-ospf-1]area 1
rtb-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
RTB-ospf-1]import-route direct
RTC-LoopBack0] ip address 3.3.3.3 255.255.255.255
rtc]ospf 1
RTC-ospf-1]area 0
RTC-ospf-1-area-0.0.0.0]network 20.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.0]area 2
rtc-ospf-1-area-0.0.0.2]nssa
rtc-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtc-ospf-1-area-0.0.0.2]network 3.3.3.3 0.0.0.0
RTD-LoopBack0] ip address 4.4.4.4 255.255.255.255
RTD]ospf 1
RTD-ospf-1]area 2
RTD-ospf-1-area-0.0.0.2]network 30.0.0.0 0.0.0.255
rtd-ospf-1-area-0.0.0.2]nssa
RTD-ospf-1]import-route direct
Which of the following routes ______ cannot possibly exist in the RTD's routing table.

A) 2.2.2.2/32
B) 3.3.3.3/32
C) 1.1.1.1/32
D) 0.0.0.0/0

Solutions: