2022 Provide Updated Network Appliance NS0-183 Dumps as Practice Test and PDF
NS0-183 Dumps are Available for Instant Access
NetApp NS0-183 Exam Certification Details:
| Exam Registration | PEARSON VUE |
| Sample Questions | NetApp NS0-183 Sample Questions |
| Exam Name | Storage Installation Engineer ONTAP |
| Exam Price | $150 USD |
NEW QUESTION 12
After you deploy a 4-node AFF A220, you want to upgrade the ONTAP version of the cluster.
In this scenario, before the upgrade, which advanced CLI command is used to locate epsilon?
- A. clustering ring show
- B. cluster ha show
- C. cluster image show
- D. cluster show
Answer: D
NEW QUESTION 13
During handover, a customer asks you how to obtain support from NetApp after installation.
What are two responses in this scenario? (Choose two.)
- A. Send an AutoSupport message from the system.
- B. Visit.
- C. Visit mysupport.netapp.com
- D. Contact Global Support by telephone.
Answer: C,D
NEW QUESTION 14
Click the Exhibit button.
You are receiving AutoSupport e-mail from both controllers, but Active IQ is showing updates from only node cl-01-02.
Referring to the exhibit, what is a reason why Active IQ is receiving AutoSupport updates from only node cl-01-02?
- A. A firewall rule is blocking the AutoSupport.
- B. The service processor is not configured.
- C. The mail host is blocking the AutoSupport.
- D. The cluster management LIF is down.
Answer: A
NEW QUESTION 15
While preparing for a new cluster installation, your customer indicates that they have some disk shelves and switches that were discontinued at their old site. They want to re-use as much of this equipment as possible. You must verify that their discontinued equipment is compatible with the new equipment they have on order.
Which two actions will accomplish this task? (Choose two.)
- A. Use the Hardware Universe portal (HWU).
- B. Verify compatibility from Activity IQ.
- C. look up the compatibility in the Interoperability Matrix Tool (IMT).
- D. Run the Cluster Configuration Builder tool (ConfigBuilder).
Answer: A,C
NEW QUESTION 16
Click the Exhibit button.
Referring to the exhibit, what information is forwarded to syslog after you enter the scripted install commands? (Choose two.)
- A. AutoSupport messages
- B. command history
- C. SNMP traps
- D. EMS messages
Answer: A,B
Explanation:
Explanation/Reference: https://www.netapp.com/media/10674-tr4569.pdf
NEW QUESTION 17
Your customer wants to buy four new DS212C shelves with an 8 TB SATA drive. The customer also wants to know the usable aggregate size of this configuration.
In this scenario, which resource would you use to accomplish this task?
- A. Interoperability Matrix Tool (IMT)
- B. Fusion
- C. Hardware Universe (HWU)
- D. Config Advisor
Answer: B
NEW QUESTION 18
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. data LIF
- B. cluster LIF
- C. node management LIF
- D. cluster management LIF
Answer: C
Explanation:
https://docs.netapp.com/us-en/ontap/networking/lif_roles95.html#lif-compatibility-with-port-types
NEW QUESTION 19
Which statement regarding a node-management LIF is true?
- A. The LIF must use two switches for redundancy purposes.
- B. The LIF can be set up on a dedicated VLAN in the cluster network.
- C. The LIF can be set up on a dedicated VLAN in the data network.
- D. The LIF can be set only on the built-in node-management port - e0M.
Answer: C
NEW QUESTION 20
You are installing a new ONTAP 9.7 cluster and attaching the cluster to two separate networks. Your customer has indicated that the same range of client IP addresses are used on both networks and that the networks are never allowed to communicate with each other.
In this scenario, which ONTAP feature must be configured to securely allow all clients to access ONTAP NAS protocols?
- A. broadcast domains
- B. BGP
- C. IPspaces
- D. routing
Answer: C
Explanation:
https://www.netapp.com/media/16885-tr-4182.pdf 9.3 Multiple IPspaces with Overlapping IP Addresses
NEW QUESTION 21
A customer wants to expand a 10-node AFF A700s NAS cluster running with Cisco Nexus 3132Q-V cluster interconnect switches using new nodes.
In this scenario, what is the maximum number of nodes to be added into this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 22
One of the nodes in your ONTAP 9.7 cluster has failed and is not coming back online.
Which two methods would you use to connect to the node failing to come back online? (Choose two.)
- A. Use the Service Processor Interface.
- B. Use Secure Shell.
- C. Use Telnet.
- D. Use the Intelligent Platform Management Interface.
Answer: A,B
NEW QUESTION 23
Click the Exhibit button.
You are installing a new FAS cluster. The management network must be on tagged VLAN 11 for remote administration by a service provider.
Referring to the exhibit, which two ports will allow service provider access to both cluster and node management LIFs? (Choose two.)
- A. e0M-11
- B. e0M
- C. e0b-11
- D. e0a-11
Answer: A,B
NEW QUESTION 24
You completed the installation of an AFF A700s with NetApp CN1610 switches. You used ports e0a and e0f with breakout cables to connect the controllers to the interconnect switches. After completing the cluster setup, ports e0e and e0i are not visible in OnCommand System Manager. In this scenario, what caused this problem?
- A. You must first enable the ports using the network port modifycommand.
- B. You are missing a license to enable those ports.
- C. Breakout cables were used and the second port on the same ASIC became disabled.
- D. This is a hardware error and you must open a case with NetApp Support.
Answer: A
NEW QUESTION 25
You are preparing for a new installation. While determining the most suitable version of ONTAP software to deploy, you want to verify the ONTAP 9 release cadence to ensure that you are deploying a Long Term Service (LTS) release.
In this scenario, where would you find this information?
- A. Visit the Hardware Universe site.
- B. Visit the Interoperability Matrix Tool site.
- C. Visit the NetApp Support site.
- D. Visit the ONTAP 9 Documentation Center site.
Answer: D
NEW QUESTION 26
You are creating an aggregate on a new FAS8200 with two DS224C shelves. Your customer wants to be able to use the Disk Maintenance Center.
In this scenario, what is the minimum number of spare disks required per node and disk type?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 27
You want to ensure the highest path resilience and performance increase to the storage stack on your FAS8700 cluster.
In this scenario, which two types of stack cabling are available to use? (Choose two.)
- A. quadpath HA
- B. single path
- C. multipath HA
- D. mixed-mode
Answer: C,D
NEW QUESTION 28
You are installing a new AFF A400 cluster and need to access the cluster management LIF from a remote subnet with the fully qualified domain name (FQDN) a400.lab.netapp.com.
In this scenario, which two network components must be configured to log in to ONTAP System Manager from the remote subnet? (Choose two.)
- A. route
- B. VLAN
- C. NTP
- D. DNS
Answer: A,D
NEW QUESTION 29
In an ONTAP 9.7 cluster, which LIF role is used for sending AutoSupport, establishing Network Time Protocol (NTP), and loading software updates?
- A. data LIF
- B. cluster LIF
- C. node management LIF
- D. cluster management LIF
Answer: C
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID- DFFBE8D9-E824-4085-8FA2-24E367288CB8.html
NEW QUESTION 30
While testing a recently installed FAS8700 cluster, a node fails. You now need to replace the impaired node.
In this scenario, which two statements are true? (Choose two.)
- A. A controller model of the same type must be used to replace the impaired node.
- B. You can change any drives or disk shelves as part of this replacement procedure.
- C. The boot device must remain intact and must not be removed from the impaired node.
- D. You must move the boot device from the impaired node to the replacement node.
Answer: A,D
NEW QUESTION 31
You just installed two nodes into an existing ONTAP cluster.
When running date on the CLI you notice that the cluster1-03 node is running behind time. You confirmed that you can reach the node management LIF of each node.
Referring to the exhibit, which statement is true?
- A. The NTP is adjusting in small increments.
- B. The DNS is not configured for this node.
- C. No NTP server is configured for this node.
- D. The node-management LIF has to be on e0M for NTP to work.
Answer: B
NEW QUESTION 32
You want to verify that connections are cables correctly and that shelf IDs are unique within an HA pair.
Which tool would be used to accomplish these tasks?
- A. System Diagnostics
- B. Active IQ Unified Manager
- C. Active IQ Config Advisor
- D. Cloud Insights
Answer: A
NEW QUESTION 33
A customer has an AFF A800 with 24 internal drives and is running out of storage capacity.
In this scenario, which action will solve this issue?
- A. Attach an additional DS212C shelf, filled with drives.
- B. Insert more internal NVMe SSD drives.
- C. Attach an additional DS460C shelf, filled with drives.
- D. Insert more internal SSD drives.
Answer: B
NEW QUESTION 34
What is the maximum port speed of an Ethernet port on a Cisco Nexus 3232C cluster-interconnect switch?
- A. 100GbE
- B. 200GbE
- C. 10GbE
- D. 40GbE
Answer: D
NEW QUESTION 35
You are installing a new ONTAP 9.7 cluster by following the installation and setup poster. You are ready to complete the initial cluster setup. You have connected your laptop to the management switch. However, when browsing the network, you are unable to discover the ONTAP controllers.
Which statement explains this behavior?
- A. You do not have a default gateway set.
- B. You do not have IPv6 configuration set.
- C. You do not have a static IP address.
- D. You do not have network discovery enabled.
Answer: A
NEW QUESTION 36
......
Updated NS0-183 Dumps Questions For Network Appliance Exam: https://actual4test.practicetorrent.com/NS0-183-practice-exam-torrent.html