[Dec-2023] Aruba Certified Design Expert (ACDX) HPE6-A80 Exam Practice Dumps
2023 HPE6-A80 Premium Files Test pdf - Free Dumps Collection
HP HPE6-A80 certification exam covers a wide range of topics, including Aruba network design principles, network planning, and designing complex wireless networks. It also tests the candidate's proficiency in designing secure wireless networks, configuring controllers, and implementing advanced features such as voice, video, and location services. Additionally, the exam assesses the candidate's ability to troubleshoot common issues that may arise in Aruba wireless networks.
NEW QUESTION # 15
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?
- A. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
- B. The Aruba CX 630DM support up to 75W PoE+ per port
- C. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
- D. The customer wants to utilize LACP on AP515 in VSF switch configuration.
Answer: B
NEW QUESTION # 16
A customer has multiple, very small branch sites that require just one or two APs each. The office has a local Internet connection, but all of the traffic is destined To the corporate data center, which has an Aruba wireless solution.
Which branch office solution best meets the customer needs?
- A. RAPs and 7005 branch office controllers with an. SD-WAN license
- B. RAPs and no branch office controllers
- C. IAPs and 7005 branch office controllers with an 3D-WAN license
- D. CAPS and 7005 branch office controllers
Answer: D
NEW QUESTION # 17
Refer to the exhibit.
A hotel needs a wireless solution, i he hotel has 802.3af switches.
The architect has selected the 505H Series, controlled by a local MC as the best choice The 5QoH series will need to power a connected phor which have only a single Ethernet port. The architect has created the BOM shown in the exhibit. (Note that this portion of the BOM does not inc Which correction should the architect make?
- A. Remove the mounting adapters.
- B. Propose new direct power source for phone.
- C. Change the 5Q5H to the 3Q3HR model.
- D. Upgrade to PoE+ switches.
Answer: B
NEW QUESTION # 18
Refer to the exhibit.
A customer needs a wired network upgrade and has complained about performance issues. The architect collected information about traffic now on several switch ports in different locations across the network, and the results are shown in the exhibit. Each of these ports is a 1Gbps port.
What can the architect conclude?
- A. Port 1 shows periods of congestion; other ports are not congested.
- B. Port 3 snows periods of congestion; other ports are not congested.
- C. All of the ports show serious congestion
- D. None of these ports show any periods of congestion
Answer: D
NEW QUESTION # 19
A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID's for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?
- A. RAPs and branch office controllers
- B. CAPS and branch office controllers
- C. lAPs with Aruba central
- D. IAPs with branch office controllers
Answer: C
NEW QUESTION # 20
Refer to the exhibit.
A customer needs to create a proposal for a full wireless solution for a customer The customer has indicated that the MCs will connect to Aru&a CX Switches at the core and the APs will connect to PoE-i- switches at the edge. The customer requires that the wireless solution support at least 50 Mbps concurrently per AP. The architect has created a BOM tor a Mobility Master (MM), two MC 721os, and 400 AP-535S. me exhibit snows this BOM.
Which components has the architect forgotten?
- A. SFP+ transceivers tor the MC connections
- B. Sufficient Enterprise licenses for the APs on both MCs
- C. Mounting Kits tor the MOs and MM
- D. Smart Rate PoE+ injectors for the APs
Answer: C
NEW QUESTION # 21
Refer to the exhibit.
Exhibit: A49.01114316-102
The architect has determined that this building requires two 10GPE links to the data center.
What is the correct transceiver type for the links?
- A. 3FP+ LRM with mode conditioning
- B. SFP+ LRM
- C. SFP+ LR
- D. SFP+ SR
Answer: B
NEW QUESTION # 22
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
What is one Important security action that the wireless solution supports to comply with PCI DSS?
- A. Implement TKIP encryption on the wireless network used by POS devices.
- B. Enforce role-based access control on administrators who access controllers
- C. Impose mandatory clean up periods to delete records of user access to controllers
- D. Use test-practice, factory default settings for security settings and login credentials.
Answer: D
NEW QUESTION # 23
Refer to the exhibit.
A hospital needs an upgrade to 802.1tax for its wireless network. The wireless network supports:
* wireless medical devices
* medical staff voice communicators
* laptops in nurse stations
* medical staff tablets
* visitor and patient personal devices.
All of these devices support both the 2 4GHz and 5GH2 band. Assuming about a max throughput on50 Mbps per AP; the hospital would like. The architect has used VisualRF to plan the AP placement on one of the floors, which the hospital expects will need to suppod about 800 win to deploy APS in stairwells between floors.
How well does the plan meet the requirements?
- A. The current AP placement meets the customer requirements in terms of coverage and capacity.
- B. The current AP placement fails to provide adequate signal for the voice communicators in several areas
- C. The current AP placement fails to account for the lead-lined wails that are common in patient and exam rooms.
- D. The current AP placement meets coverage requirements, but does not meet capacity requirements.
Answer: C
NEW QUESTION # 24
A hospital needs a Getter way to track its inventory Including wireless medical devices that are moved around the site a lot.
Which solution meets these needs?
- A. Aruba asset tags and beacons
- B. Aruba beacons. APs. and AirWave
- C. Aruba asset tags, APs; and Meridian
- D. Aruba beacons and Meridian
Answer: D
NEW QUESTION # 25
A hospital wireless network must support many different types of users and devices, including:
* Visitors who access the Internet
* Admin staff, who run applications such as scheduling
* Medical staff, who look up patient info on their tablets
* Patient monitoring devices, which must not lose any traffic
* Communicator badges, which support real-time voice to allow nurses and doctors to communicate The hospital needs to ensure that the most vital and time-sensitive traffic is prioritized and that visitors do not interfere with hospital applications. The MC should mark traffic that passes through it for an appropriate priority.
Which plan meets the needs? (The plans describe firewall roles and rules but do not need to use correct syntax. Note that security roles are also not included.)
- A. Medical staff = Highest. Patient monitoring = Highest. Admin staff - High. Communicator = Normal. Visitors = Low.
- B. Patient monitoring = Highest. Medical staff = Highest. communicators = High. Admin staff = High. Visitors = Normal.
- C. Communicator = Highest. Patient monitoring = Highest. Medical staff = High. Admin staff = Normal: Visitors = Low.
- D. Medical staff = Highest. Communicator = High. Patient monitoring = High. Admin = High. Visitors = Normal
Answer: A
NEW QUESTION # 26
Refer to the exhibit.
A customer has these availability requirements;
* loss of one controller with stateful failover and without impact on wireless client connectivity
* loss of one core switch without loss of connectivity for any endpoints or APs in the building
* loss of any one switch-lo-switch or MC-to-switch link without loss of connectivity for any endpoints or APS in the building and with minimal impact on infrastructure functionality
* loss of any one access switch with minimal impact to wireless client connectivity The exhibit shows the current plan for the topology.
Which change should the architect make to the plan to provide better support for the customers availability requirements?
- A. Add VLANs 11 and 15 to the MC connections to ensure both MCS can manage any of the APS.
- B. Add 120 additional AP licenses, so that each MC can support ail the APs, even if the other MC fails.
- C. Use two 40GBE DACs between the core V3X switches for their switch links.
- D. Change the 40GbE DAC on the 8400 switch to a stacking cable with stacking module.
Answer: B
NEW QUESTION # 27
A customer needs an AP for an indoor lecture nail mat is about 82 feet (25 m) by 32 feet (25 m) and has 300 seats. The ceiling height is 15 feet The expected take rate is 100 percent.
The network needs to support the student laptops, which all support S02.Hac and some support 802.11ax standard.
The customer would like to obtain as many usable cells as possible with as few APs as possible.
Which of these APs meets the requirements?
- A. AP-S15
- B. AP-345
- C. AP-335
- D. AP-535
Answer: D
NEW QUESTION # 28
An indoor sports stadium has 5.000 seats in two rings:
* The stadium has a ceiling height of 72 feet (22 m).
* There is a catwalk around the perimeter of me stadium that is 54 feet (13 m) from me floor.
* There are two scoreboards at either end of the stadium
* The construction of the stadium is concrete and steel.
The customer has indicated a preference for overhead coverage, and the wireless network should support 3500 concurrent clients. The architect plans to install the APs on the catwalk to service sections of the floor below Which type or antennas are recommended for the APS that provide the overhead coverage?
- A. vagi
- B. downtilt
- C. high gain directional
- D. high gain omnidirectional
Answer: C
NEW QUESTION # 29
A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
The APs will he installed on the ceilings, which are about S feel (2.4 m) high.
What is one feature on the APs that can help the customer comply with PCI DSS?
- A. User and Entity Behavior Analytics (UEBA)
- B. Anomaly-based threat detection
- C. Smart Rate ports
- D. Physical security with Kensington Security Slots
Answer: C
NEW QUESTION # 30
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?
- A. the deployment of dual SGHz radio APs
- B. support for beacon management
- C. AP operation as hybrid AMs for IDS/WIPS
- D. location tracking of wireless loT devices
Answer: B
NEW QUESTION # 31
A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?
- A. a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs
- B. two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS
- C. two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs
- D. two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs
Answer: A
NEW QUESTION # 32
Refer to exhibit.
A customer has a building that needs a switch upgrade. The customer would like at least 20Gbps for the uplink bandwidth out of each closet. The building wiring plan is shown in Exhibit i. The customer will not consider any cabling upgrades at this point. The current proposal is shown in Exhibit 2.
Which correction must the architect make to the proposal to meet the customer requirements?
- A. Add a mode conditioning cable for each link between the wiring closet switches and the network core.
- B. Add an aggregation layer, and connect wiring closet switches to the aggregation layer on Smart Rate pons.
- C. Add an aggregation layer, and connect wiring closet switches to the aggregation layer with SFP+- SR transceivers
- D. Change the SR transceivers tor each link between the wiring closet switches and me network core to LRM transceivers
Answer: A
NEW QUESTION # 33
A retail customer is doing a wired and a wireless refresh with Arut>a CX switches and S02.11ax APs. Currently, trey nave wireless Point of Sales (PoS) systems and would like to assure that the proposed deployment solution will comply with the Payment Card Industry (PCI) Data Security Standard (DSS) requirements.
The architect have proposed the following deployment solutions regarding PCI DSS requirements'
-IDS/IPS
-Aruba APs in hybrid mode as well as in dedicated AMs mode
-Strong authentication and encryption for wireless
-Built-in firewall and role-based access controls to segment WLAN
Which other requirements must you include in the existing deployment solution? (Select two.)
- A. Switch high-availability solution VSF and VSX also can encrypt all traffic on their switch links.
- B. Suggest MACSet between the Aruba CX switches that encrypt all traffic over the link.
- C. Aruba Central or Aruba AirWave to generate a scheduled compliance reporting.
- D. Select the FIPS/TAA-compliant version for the Access Points.
- E. Role-based access controls for wired users using ClearPass. Optionally ; tunneled-node to MCs.
Answer: C,E
NEW QUESTION # 34
A customer has an Aruba wireless network. which includes two MC 7205s and an MM at the network core. The company now wants to accommodate 50 mobile trainers These trainers travel around the world and run training events. The trainers often need to access materials in the company data center, but cannot reach materials when they are on the road.
The company wants to give the mobile workforce a secure way to reach the materials they need no matter where they are.
including in public spaces like the hotels where they often leach. The customer also requires that the solution be as cost effective as possible while meeting the requirements.
Which plan meets the needs of the mobile Trainers?
- A. Add 50 RAPs: add 50 Enterprise licenses to the MM, and add two 7005 MCs in the DMZ.
- B. Add so PEFV licenses to the MM. and add an additional 7205 MC to the core.
- C. Add 50 RAPs; add 50 Enterprise licenses and 50 VIA licenses to the MM
- D. Add 50 VIA licenses to the MM, and deploy two 7005 MCs in the DMZ.
Answer: C
NEW QUESTION # 35
A customer has an existing Aruba wireless solution at their campus. This solution is shown in the exhibit.
The customer now wants to enhance seamless roaming and failover across the solution. The customer wants the least expensive solution that still meets the needs.
Which figure shows the correct changes to the solution to meet the new needs?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: C
NEW QUESTION # 36
Refer to the exhibit.
The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)
- A. The 8400 switches run different software than the 5400R switches.
- B. The 8400 switches cannot be monitored by AirWave.
- C. The 8400 switches are fixed port switches.
- D. The 8400 switches do not support VSF.
- E. The 8400 switches have a smaller ARP table than the 540OR switches.
Answer: A,E
NEW QUESTION # 37
......
Get ready to pass the HPE6-A80 Exam right now using our Aruba Certified Design Expert (ACDX) Exam Package: https://actual4test.practicetorrent.com/HPE6-A80-practice-exam-torrent.html