[Jan 18, 2024] Get New 2V0-41.20 Certification Practice Test Questions Exam Dumps [Q20-Q41]

[Jan 18, 2024] Get New 2V0-41.20 Certification Practice Test Questions Exam Dumps

Real 2V0-41.20 Exam Dumps Questions Valid 2V0-41.20 Dumps PDF

VMware NSX-T Data Center is a software-defined networking and security platform that enables the creation of virtualized network functions in a multi-cloud environment. The platform simplifies network management and enhances security by allowing administrators to create, manage, and secure virtual networks using a single management console. VMware 2V0-41.20 exam is designed to test and validate the skills required to effectively manage VMware NSX-T Data Center solutions.

 

NEW QUESTION # 20
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?

• A. Port Mirroring
• B. Switch Visualization
• C. Activity Monitoring
• D. IPFIX

Answer: B

NEW QUESTION # 21
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)

• A. can have a maximum of 10 edge nodes
• B. must contain only one type of edge nodes (VM or bare metal)
• C. can contain multiple types of edge nodes (VM or bare metal)
• D. must have only active-active edge nodes
• E. can have a maximum of 8 edge nodes

Answer: A,C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-14183A62-8E8D-43CC-92E0-E8D72E198D5A.html

NEW QUESTION # 22
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

• A. vm-support
• B. esxcli system syslog config logger set --id=nsxmanager
• C. set support-bundle file vcpnv.tgz
• D. get support-bundle file vcpnv.tgz

Answer: A

NEW QUESTION # 23
How does the Traceflow tool identify issues in a network?

• A. Injects synthetic traffic into the data plane and observes the results in the control plane.
• B. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
• C. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
• D. Injects ICMP traffic into the data plane and observes the results in the control plane.

Answer: A

NEW QUESTION # 24
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

• A. SYSTEM
• B. FABRIC
• C. GROUPING
• D. MONITORING

Answer: B

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION # 25
What are three NSX Manager roles? (Choose three.)

• A. manager
• B. controller
• C. zookeeper
• D. master
• E. cloud
• F. policy

Answer: A,B,F

NEW QUESTION # 26
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?

• A. esxcli network firewall ruleset set -a -e false
• B. esxcli network firewall ruleset -e syslog
• C. esxcli network firewall ruleset set -r syslog -e true
• D. esxcli network firewall ruleset set -r sysloq -e false
  Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf

Answer: C

NEW QUESTION # 27
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• B. Automatically created when Tier-1 is created.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html

NEW QUESTION # 28
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?

• A. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint
  <nsx-manager-thumbprint>
• B. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint
  <nsx-manager-thumbprint>
• C. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>
• D. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
  <nsx-manager-thumbprint>

Answer: A

NEW QUESTION # 29
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: D

NEW QUESTION # 30
What are two supported N-VDS modes? (Choose two.)

• A. DPDK Datapath
• B. Enhanced Datapath
• C. Standard Datapath
• D. Overlay Datapath
• E. Secure Datapath

Answer: B,C

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D

NEW QUESTION # 31
Where are Distributed Firewall logs containing access decisions stored?

• A. NSX Edge
• B. NSX Manager
• C. NSX API
• D. Hypervisor transport node

Answer: D

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A

NEW QUESTION # 32
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)

• A. Add a logical switch.
• B. Configure an IPsec session.
• C. Configure a distributed firewall policy.
• D. Add a local endpoint.
• E. Create an IPsec service.

Answer: B,D,E

NEW QUESTION # 33
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?

• A. set service nsx-manager logging-level debug
• B. set service nsx-manager log-level debug
• C. set service manager log-level debug
• D. set service manager logging-level debug

Answer: D

Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html

NEW QUESTION # 34
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

• A. 0
• B. 1234
  The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual
• C. 1
• D. 2
• E. 3

Answer: B,D

NEW QUESTION # 35
Which statement describes the VMware Virtual Cloud Network Vision?

• A. Virtual Cloud Network connects and protects virtual machines running in KVM environments.
• B. Virtual Cloud Network connects and protects virtual machines running in vSphere environments.
• C. Virtual Cloud Network connects and protects applications, regardless of their physical locations.
• D. Virtual Cloud Network connects and protects applications and data, regardless of their physical locations.

Answer: D

NEW QUESTION # 36
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node. Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?

• A. Port Mirroring
• B. Switch Visualization
• C. Activity Monitoring
• D. IPFIX

Answer: B

NEW QUESTION # 37
Which CLI command shows syslog on NSX Manager?

• A. get log-file syslog
• B. show log manager follow
• C. /var/log/sysloq/syslog.log
• D. get log-file auth.log

Answer: A

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E

NEW QUESTION # 38
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

• A. virsh list-interface <VM Name>
• B. virsh show <VM Name> | grep interfaceid
• C. virsh get-interface <VM Name>
• D. virsh dumpxml <VM Name> | grep interfaceid

Answer: D

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

NEW QUESTION # 39
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)

• A. Service Insertion
• B. Service Deployment
• C. Service Consumption
• D. Service Registration
• E. Service Introspection

Answer: A,B,E

NEW QUESTION # 40
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

• A. TLS
• B. HTTPS
• C. TCP
• D. SSH
• E. UDP
• F. SSL

Answer: A,C,E

NEW QUESTION # 41
......

2V0-41.20 Exam Dumps - PDF Questions and Testing Engine: https://actual4test.practicetorrent.com/2V0-41.20-practice-exam-torrent.html