Latest JN0-1302 Pass Guaranteed Exam Dumps with Accurate & Updated Questions [Q14-Q39]

Share

Latest JN0-1302 Pass Guaranteed Exam Dumps with Accurate & Updated Questions

JN0-1302 Exam Brain Dumps - Study Notes and Theory


Juniper JN0-1302 Exam Certification Details:

Passing ScoreVariable (60-70% Approx.)
Exam NameData Center Design Specialist
Number of Questions65
Recommended TrainingJuniper Networks Design - Data Center (JND-DC)
Sample QuestionsJuniper JN0-1302 Sample Questions
Duration90 minutes
Exam CodeJN0-1302 JNCDS-DC
Exam RegistrationPEARSON VUE

 

NEW QUESTION 14
Exhibit.

For a fully configured and functional IP fabric underlay as shown in the exhibit how many external BGP neighbors are expected to be in established state for Leaf 1?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 15
Contrail Networking performs which three functions? (Choose three)

  • A. Configure physical network functions
  • B. Perform service chain network functions
  • C. Virtualize networks
  • D. Configure storage components
  • E. Deploy bare metal compute devices

Answer: A,C,E

 

NEW QUESTION 16
You are designing a new data center that will be built using an IP fabric One of your security requirements is that the gateway for all of your VLANs must reside on the data center SRX firewalls Which IP fabric architecture will satisfy this requirement?

  • A. server routed overlay
  • B. edge routed overlay
  • C. centrally routed overlay
  • D. bridged overlay

Answer: B

 

NEW QUESTION 17
You are designing a new Data Center Interconnect (DCI) that will be MPLS-based where the PE routers need to learn local and remote MAC addresses In this scenario, which two CXI deployment methodologies satisfy this requirement? (Choose two)

  • A. LDP Layer 2 circuits
  • B. EVPN
  • C. BGP Layer 2 VPNs
  • D. VPLS

Answer: A,B

 

NEW QUESTION 18
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

  • A. You should use CoS rewrite rules for traffic leaving the spine devices.
  • B. You should use CoS rewrite rules for traffic coming into the spine devices.
  • C. You should use CoS rewrite rules for traffic leaving the leaf devices.
  • D. You should use CoS rewrite rules for traffic coming into the leaf devices.

Answer: A,C

 

NEW QUESTION 19
You are asked to design a solution for your data center EVPN/VXLAN fabric that will allow connectivity for all of your service platforms, such as firewalls and load balancers into a dedicated pair of border leaf devices Which three Juniper Networks platforms would support this requirement? (Choose three )

  • A. 0MX Series
  • B. SRX Series
  • C. QFX10000 Series
  • D. QFX5120 Series
  • E. EX4300-MP Series

Answer: B,C,E

 

NEW QUESTION 20
What are two overlay protocols that should be considered in your data center design when using an IP fabric underlay? (Choose two.)

  • A. VPLS
  • B. MPLSoGRE
  • C. VXLAN
  • D. OSPF

Answer: A,C

 

NEW QUESTION 21
You must deploy a solution within your data center that will provide capacity planning for your virtual machine environment. In this scenario, which Juniper Networks solution would accomplish this task?

  • A. Contrail Insights
  • B. Juniper Secure Analytics
  • C. Junos Space
  • D. Contrail Cloud

Answer: C

 

NEW QUESTION 22
You are implementing a new data center and need to plan to connect it to your existing data center. You have the requirement for active/active forwarding to enable load balancing and reduce failure times Which two technologies should be evaluated for this design? (Choose two.)

  • A. VPLS
  • B. Layer 2 VPN
  • C. EVPN
  • D. point-to-point links

Answer: A,C

 

NEW QUESTION 23
You want to encapsulate Layer 2 frames for transport across a Layer 3 network.
Which three methods are supported by Juniper Networks to accomplish this task? (Choose three)

  • A. VXLAN
  • B. EVPN
  • C. MPLS over UDP
  • D. MPLS over GRE
  • E. Layer 3 VPN

Answer: A,B,D

 

NEW QUESTION 24
When using BGP Layer 2 VPN for a Data Center Interconnect, which statement about MAC learning is correct?

  • A. Control plane MAC learning is used
  • B. Data plane MAC learning is used.
  • C. MAC learning is not used.
  • D. Management plane MAC learning is used.

Answer: A

 

NEW QUESTION 25
Exhibit.

Referring to the exhibit, which two statements are true? (Choose two)

  • A. The vSRX is not performing microsegmentation
  • B. The vSRX is working in transparent mode
  • C. The vSRX is working in routed mode
  • D. The vSRX is performing microsegmentation

Answer: C,D

 

NEW QUESTION 26
Exhibit.

You are designing a Data Center Interconnect to transport VXLAN traffic between DC-A and DC-B Which two technologies will allow the MX Series routers to transport the VXLAN packets over the WAN, as shown in the exhibit? (Choose two)

  • A. VPLS
  • B. Layer 2 VPN
  • C. IP routing
  • D. Layer 3 VPN

Answer: A,D

 

NEW QUESTION 27
Exhibit.

For a fully configured and functional IP fabric underlay as shown in the exhibit how many external BGP neighbors are expected to be in established state for Leaf 1?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

 

NEW QUESTION 28
Which statement about a Virtual Chassis deployment is correct?

  • A. A Virtual Chassis uses Spanning Tree Protocol between individual member switches
  • B. A Virtual Chassis can interconnect as many as 20 switches to form a single virtual device.
  • C. A Virtual Chassis can include switches mounted in multiple different racks.
  • D. All member switches must be running the same Junos version.

Answer: B

 

NEW QUESTION 29
You want to encapsulate Layer 2 frames for transport across a Layer 3 network.
Which three methods are supported by Juniper Networks to accomplish this task? (Choose three)

  • A. EVPN
  • B. MPLS over UDP
  • C. VXLAN
  • D. MPLS over GRE
  • E. Layer 3 VPN

Answer: A,B,D

 

NEW QUESTION 30
Which two statements about a three-stage Clos IP Fabric architecture are correct? (Choose two.)

  • A. Each server-facing interface is always two hops away from any other server-facing interfaces.
  • B. No physical connectivity exists between spine devices.
  • C. Each leaf node should have a physical connection to every other leaf node.
  • D. Each server-facing interface is always one hop away from any other server-facing interfaces.

Answer: B,D

 

NEW QUESTION 31
Which two statements describe CoS? (Choose two.)

  • A. CoS does not create additional bandwidth.
  • B. CoS does not protect sensitive traffic flows
  • C. CoS creates an end-to-end guaranteed bandwidth reservation
  • D. CoS can be used to differentiate traffic for different customers.

Answer: A,D

 

NEW QUESTION 32
During a design requirements gathering meeting for a new data center, your customer indicates that traffic to and from corporate HR systems is highly sensitive and mat the network design should ensure that these systems are protected from unauthorized access Which three design actions would satisfy this requirement? (Choose three.)

  • A. Disable routing to and from HR systems.
  • B. Use FBF to steer HR traffic to security devices.
  • C. Place HR systems in a unique VR.
  • D. Enable a dedicated VLAN for HR systems.
  • E. Put all HR systems in dedicated racks.

Answer: A,C,E

 

NEW QUESTION 33
A customer has concerns about various groups having the ability to easily access their corporate network infrastructure They want to implement tighter controls for network infrastructure system access Which three actions will accomplish this task? (Choose three )

  • A. Use a secure access VPN
  • B. Provide local passwords
  • C. Disable root access
  • D. Open console port access
  • E. Use RADIUS accounting.

Answer: A,C,E

 

NEW QUESTION 34
You are asked to propose a solution to interconnect two remote data centers over the Internet The traffic that will be traversing this connection is very sensitive and must be encrypted between the two sites In this scenario, which solution should you propose?

  • A. EVPN
  • B. MPLS Layer 3 VPN
  • C. IPsec VPN
  • D. GRE

Answer: A

 

NEW QUESTION 35
Exhibit.

You are designing a data center where all your servers in each rack will be connected to two top-of-rack (ToR) switches using Layer 2 as shown in the exhibit You must implement a high availability solution that maintains link layer connectivity to each server when one of the ToR switches fails In this scenario, which solution will accomplish this task?

  • A. non-stop bridging (NSB)
  • B. Virtual Chassis with LAG
  • C. chassis cluster with LAG
  • D. bidirectional forwarding detection (BFD)

Answer: C

 

NEW QUESTION 36
Which two Junos components does cRPD contain? (Choose two.)

  • A. Kernel
  • B. Kubernetes
  • C. RIB
  • D. MGD

Answer: C,D

 

NEW QUESTION 37
Your company wants to expand operations and build small data centers in locations where it is difficult to maintain physical routing equipment. You must recommend a Juniper product that minimizes this issue.
Which product would you recommend in this situation?

  • A. vRR
  • B. MX104
  • C. vMX
  • D. Virtual Chassis

Answer: C

 

NEW QUESTION 38
Exhibit.

You are designing a data center where all your servers in each rack will be connected to two top-of-rack (ToR) switches using Layer 2 as shown in the exhibit You must implement a high availability solution that maintains link layer connectivity to each server when one of the ToR switches fails in this scenario, which solution will accomplish this task?

  • A. GRES with NSB
  • B. LAG
  • C. VRRP
  • D. MC-LAG

Answer: D

 

NEW QUESTION 39
......


Juniper JN0-1302 Exam Topics:

SectionObjectives
Data Center SecurityDescribe the design considerations for securing the data center
  • Micro-perimeterization
  • Micro-segmentation
  • Virtual routers
  • Firewalls
  • Security automation
  • Device sprawl
  • Data classification
  • Connected security
  • Zero trust security
  • Risk management
Data Center InterconnectDescribe the design considerations for interconnecting data centers
  • MPLS
  • Layer 3 VPNs
  • EVPN
  • VXLAN
Virtualization in the Data CenterDescribe the design considerations for virtualization in the data center
  • NFV/containers
  • ETSI standards
  • Virtualization security
  • SDN
Data Center Design ConsiderationsDescribe the concepts of data center design
  • Physical considerations including placement, cabling, power, heating, and cooling
  • Access switch placement
  • Traditional multi-tiered design
  • Management
  • Automation
  • Data center monitoring
  • Virtual Chassis
  • Data center support and serviceability
High Availability in the Data CenterDescribe the design considerations for high availability in the data center
  • Business continuity
  • Device-level high availability features
  • Intra-DC high availability
  • Inter-DC high availability
Traffic Prioritization in the Data CenterDescribe the design considerations for traffic prioritization in the data center
  • QoS
  • CoS
  • DCB
IP Fabric ArchitectureDescribe the design considerations of a data center IP fabric
  • Layer 3 underlay networking
  • Layer 3 overlay networking
  • Layer 3 control plane options

 

Pass Juniper JN0-1302 Test Practice Test Questions Exam Dumps: https://actual4test.practicetorrent.com/JN0-1302-practice-exam-torrent.html