NSE7_OTS-7.2 PDF Exam Material 2024 Realistic NSE7_OTS-7.2 Dumps Questions
Updated Fortinet NSE7_OTS-7.2 Dumps – PDF & Online Engine
NEW QUESTION # 19
An OT supervisor needs to protect their network by implementing security with an industrial signature database on the FortiGate device.
Which statement about the industrial signature database on FortiGate is true?
- A. A supervisor must purchase an industrial signature database and import it to the FortiGate.
- B. An administrator must create their own database using custom signatures.
- C. A supervisor can enable it through the FortiGate CLI.
- D. By default, the industrial database is enabled.
Answer: C
NEW QUESTION # 20
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of an SNMP temperature control event log.
- B. This is a sample of a PAM event type.
- C. This is a sample of a FortiAnalyzer system interface event log.
- D. This is a sample of FortiGate interface statistics.
Answer: B
NEW QUESTION # 21
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. All connected devices, each time they connect
- B. Rogue devices, only when they connect for the first time
- C. Known trusted devices, each time they change location
- D. Rogue devices, each time they connect
Answer: B
NEW QUESTION # 22
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Enable two-factor authentication with FSSO.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- D. Under config user settings configure set auth-on-demand implicit.
Answer: C
Explanation:
Explanation
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 23
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Adapter consolidation for multi-adapter hosts
- B. Direct VLAN assignment
- C. Enhanced point of connection details
- D. Importation and classification of hosts
Answer: C,D
NEW QUESTION # 24
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiAnalyzer
- B. FortiNAC
- C. FortiGate
- D. FortiManager
- E. FortiSIEM
Answer: B,C,E
Explanation:
A: FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
D: FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
E: FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
NEW QUESTION # 25
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)
- A. Highest to lowest priority defined in the firewall policy
- B. Destination defined as internet services in the firewall policy
- C. Source defined as internet services in the firewall policy
- D. Lowest to highest policy ID number
- E. Services defined in the firewall policy.
Answer: A,B,E
Explanation:
Explanation
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 26
Which three Fortinet products can you use for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiAnalyzer
- B. FortiNAC
- C. FortiGate
- D. FortiManager
- E. FortiSIEM
Answer: B,C,E
NEW QUESTION # 27
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong hcache table for the report.
- B. The administrator selected the wrong devices in the Devices section.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
Answer: B,C
Explanation:
Explanation
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-0050569258
NEW QUESTION # 28
Which two statements are true when you deploy FortiGate as an offline IDS? (Choose two.)
- A. FortiGate receives traffic from configured port mirroring.
- B. FortiGate acts as network sensor.
- C. Network attacks can be detected and blocked.
- D. Network traffic goes through FortiGate.
Answer: B,D
NEW QUESTION # 29
Refer to the exhibit.
In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
- B. Set FortiGate to operate in transparent mode.
- C. Set a software switch on FortiGate to handle inter-VLAN traffic.
- D. Set a unique forward domain on each interface on the network.
Answer: A
NEW QUESTION # 30
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for industrial intrusion detection and prevention.
- B. It can be used for network micro-segmentation.
- C. It can be used for device profiling.
- D. It can be used for IoT device detection.
Answer: C,D
Explanation:
Explanation
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 31
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Configure firewall policies with industrial protocol sensors
- B. Deploy a FortiGate device within each ICS network.
- C. Configure firewall policies with web filter to protect the different ICS networks.
- D. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- E. Use segmentation
Answer: A,C,D
NEW QUESTION # 32
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Planning a threat hunting strategy
- B. Creating disaster recovery plans to switch operations to a backup plant
- C. Implementing strategies to automatically bring PLCs offline
- D. Evaluating what can go wrong before it happens
Answer: B,C
NEW QUESTION # 33
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM incident report
- B. A FortiSIEM CMDB report
- C. A FortiAnalyzer device report
- D. A FortiSIEM analytics report
Answer: B
NEW QUESTION # 34
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- B. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
Answer: A
Explanation:
Explanation
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 35
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for industrial intrusion detection and prevention.
- B. It can be used for network micro-segmentation.
- C. It can be used for device profiling.
- D. It can be used for IoT device detection.
Answer: C,D
Explanation:
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 36
Refer to the exhibit.
You are navigating through FortiSIEM in an OT network.
How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
- B. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
Answer: C
NEW QUESTION # 37
......
To become certified in Fortinet NSE7_OTS-7.2, candidates need to have a deep understanding of OT networks and the security challenges they face. NSE7_OTS-7.2 exam covers a wide range of topics, including industrial control systems (ICS), SCADA systems, network segmentation, access control, risk management, and incident response. Candidates also need to have a good understanding of Fortinet's security solutions, including FortiGate, FortiAnalyzer, FortiManager, and FortiSIEM.
Fortinet NSE7_OTS-7.2 Dumps PDF Are going to be The Best Score: https://actual4test.practicetorrent.com/NSE7_OTS-7.2-practice-exam-torrent.html