CTFL-AuT PDF Dumps Nov 21, 2022 Exam Questions – Valid CTFL-AuT Dumps
Ultimate CTFL-AuT Guide to Prepare Free Latest ISQI Practice Tests Dumps
NEW QUESTION 23
Which statement characterizes back-to-back testing?
- A. Back-to-back testing compares test objects with mainly overlapping requirements to recognize the results of requirement change.
- B. Back-to-back testing compares different execution environments of the same test object
- C. Back-to-back testing is a variation of pair programming in which the testers should sit back to back to be able to work as independently as possible from each other.
- D. Back-to-back testing compares lest objects which are based on the same requirements.
Answer: D
NEW QUESTION 24
Which statement regarding the coding standard MlSRA-C:2012 Is true?
- A. A typical rule in MISRA-C is that the developer has documented the implemented behavior wen.
- B. MISRA-C defines rules and guidelines that are supposed to help avoid anomalies In object-oriented developed software (e.g. in C++)
- C. MISRA-C defines rules that include among others that the source code should not include nested comments.
- D. MISRA-C defines rules and guidelines. Rules are verifiable by static analysis tools and are always required.
Answer: B
NEW QUESTION 25
During product development what does the tester create based on the Safety requirements?
- A. Test cases to check compliance with the MISRA-C:2012 coding standard
- B. Test cases and test procedure for the verification and validation of the safety related requirements
- C. Test cases and test procedures for production
- D. A software architecture that fulfils the requirement of .testability
Answer: D
NEW QUESTION 26
According to Automotive SPICE3.x, which statement regarding the requirements for a test strategy Is correct?
- A. Thetestlogs should be automated on all lest levels as much as possible to increase the comparability of the test results and reduce the effort for the lest execution.
- B. Thetest log must Include methods for test case creation. for the selection of test cases, for the creation of test data and for the lest execution
- C. Thetest report must describe the test process including the identification of menaces and dependencies from other processes.
- D. In the regression testing strategy, methods must be defined for an impact analysis and the selection of appropriate test cases for regression testing
Answer: B
NEW QUESTION 27
In the release process, which of the following work products. Information and documents are the typical output of the tester?
- A. Insulation recommendation
- B. Tested lest objects
- C. Change request
- D. Non-detected defects
Answer: D
NEW QUESTION 28
Imagine you are participating in an Automotive SPICEassessment In your rote as a software tester, and you receive the Information that your process has been assessed with ''P" on process attribute PA1.1 at capability level 1. Which meaning it correct?
- A. You have fulfilled capacity level 2.
- B. You have fulfilled capability level 1.
- C. You have fulfilled capacity level 3.
- D. You have NOT fulfilled capacity level 1.
Answer: B
NEW QUESTION 29
Which statement regarding ISO 26262 Is true?
- A. ISO 26262 Is part of Automotive SPICE Therefore, conformity with ISO 26262 is checked as part of an Automotive SPICE- assessment to avoidthe additional effort of a separate safety audit
- B. ISO 26262 is a standard for functional safety. It is a domain-specific adaption of IEC 61508 for the specific characteristics in the development of safety relevant electric-electronic systems for motor vehicles.
D, ISO 26262 is a security standard; thus, information and work security are core topics of ISO 26262. - C. According to thegeneral opinion of experts in functional safety, ISO 26262 CANNOT be considered as a contribution to the state of science and technology regarding the functional safety of road vehicles.
Answer: B
NEW QUESTION 30
Which of the following statements regarding MIL test environments is true?
- A. In the MILtest environment, stimulations and observations are possible anywhere via access points.
- B. In the MiL test environment, additional hardware is necessary to implement access points.
- C. In the MIL test environment, thetest object is available as compiled code and it is not readable by a human being.
- D. For a MIL test environment NO environmental model is necessary
Answer: A
NEW QUESTION 31
You are working as a .module tester* (syn.unit tester, component tester) inan automotive project for thedevelopment of a control unit for an electric window. During white-box lest design, you come atomic requirements: B1 AND (B2 OR B3). The task for you is to design test cases according to the principleof the modified condition/decision testing (MOOC). You have already designed three test cases:
1) B1 = TRUE, B2 = TRUE, B3 = FALSE
2) B1 = TRUE, B2 = FALSE, B3 = TRUE
3) B1 = FALSE, B2 = TRU, B3 = FALSE
Which of the following test cases is necessary to achieve 100% modified condition/decision coverage?
- A. B1 = FALSE, 62 = FALSE, B3 = TRUE
- B. B1= TRUE, B2 = TRUE. B3 = TRUE
- C. B1 = TRUE, B2 = FALSE, B3 = FALSE
- D. B1 = FALSE, B2 = FALSE, B3 = FALSE
Answer: A
NEW QUESTION 32
Which example describes a typical application of a closed-loop system?
- A. The setting of an error memory entry in the motor control unit Is to be tested To do so, the motor temperature is Increased above the critical limit and afterwards, the subsequent error memory entry will be read and assessed.
- B. Activating the hazard warning lights is to be tested To do so. the flashing lights are monitored and the flashing frequency is measured and assessed.
- C. A cruise control is to be tested by reaching me target speed In a given time and holding this speed despite outside disturbances. Different driving scenarios are simulated for this.
- D. The correct reaction of the windscreen wiper is to be tested To do so. the ram sensor Is activated by water on the screen and the windscreen wiping activities are monitored.
Answer: D
NEW QUESTION 33
Which statement regarding AUTOSAR Is NOT TRUE?
- A. One of the objectives of AUTOSAR is cooperation regarding the standards and the implementation.
- B. One of the objectives of AUTOSAR Is the replicability of software components between different vehicle platforms and between different partners.
- C. One of the objectives of AUTOSAR is to support the development of reliable systems.
- D. One of the objectives of AUTOSAR is the definition of a maintainable as well as adjustable open architecture.
Answer: C
NEW QUESTION 34
Which statement regarding the operating conditions and comparison of test environments is true?
- A. As tests for MIL and SIL take place closer to the test object, the test basis must have a higher degree of detail than In HIL.
- B. The proximity to reality in a MiL test environment is higher than In a SI test environment
- C. The costs for debugging are higher for a Si test environment than for a MiL test environment.
- D. To lest m a MIL test environment, a fullsystem specification is necessary.
Answer: D
NEW QUESTION 35
Which constraints does a SiL test environment have?
- A. Numerous internal signals of the test object can be stimulated or observed.
- B. Electric error scenarios can be tested early.
- C. The test execution can be paused anytime for further analyses.
- D. In the SiL environment the simulation time is generally shorter than the real time.
Answer: B
NEW QUESTION 36
Which test documentis required according to Automotive SPICE?
- A. Test procedure specification
- B. Test management report
- C. Load testing report
- D. Test metrics report
Answer: A
NEW QUESTION 37
Which statement regarding AUTOSAR Is TRUE?
AUTOSAR describes...
- A. ...an analysis unit, which processes Input signals and determines intermediate values and their respective output signals by using existing information.
- B. ...a collection of characteristics of the performance of processes of an organization.
- C. ...activities, methods and measures to achieve functional security for electric and electronic solutions.
- D. ...an open and standardized software architecture for vehicle development.
Answer: D
Explanation:
Explanation
https://www.pathpartnertech.com/software-architecture-autosar-for-automotive-embedded-system/
NEW QUESTION 38
Which of the following statements regarding the application of standards is true?
- A. The application of standards primarily alms at reducing costs.
- B. The application of standards helps to create transparent communication between the project stakeholders.
- C. The application of standards which standardize products has the sole purpose to reduce project risks
- D. The application of standards reduces the efficiency of agile projects
Answer: B
NEW QUESTION 39
......
Passing Key To Getting CTFL-AuT Certified Exam Engine PDF: https://actual4test.practicetorrent.com/CTFL-AuT-practice-exam-torrent.html