Real Exam Questions D-PEMX-DY-23 Dumps Exam Questions in here [Nov-2024]
Get Latest Nov-2024 Conduct effective penetration tests using D-PEMX-DY-23
NEW QUESTION # 63
A customer wants to change the switch operating mode from SmartFabric mode to Full Switch mode.
After deleting the fabric in OME-M, what configuration is retained on the switch?
- A. admin password, hostname, management IP Address, and the VLT domain configuration
- B. admin password, hostname, and management IP Address
- C. admin password, hostname, management IP Address, and all port breakout configuration
- D. admin password, hostname, management IP Address, and the VLAN database
Answer: B
NEW QUESTION # 64
A customer has an MCM group consisting of four MX7000 chassis. They need to take the lead chassis down to perform maintenance.
How can the customer ensure that another chassis takes over the lead role in the MCM Group?
- A. The MCM group will elect a new lead chassis.
- B. Promote the lead chassis to a passive chassis.
- C. Promote the backup lead chassis as the new lead chassis.
- D. The backup chassis will take the lead automatically.
Answer: C
NEW QUESTION # 65
Once power is applied to the chassis, what is the next sequence after MM completes booting?
- A. 12 V DC Rail on.
- B. MM uboot starts.
- C. PSU firmware starts.
- D. Load the LCD panel.
Answer: D
NEW QUESTION # 66
While servicing an MX7000 chassis a system administrator logs into OME-M and receives a Chassis Mismatch error.
What should be the next step taken by the administrator?
- A. Reset Peer or the Local IOM
- B. Force Active/Clear configuration
- C. Perform firmware update
- D. Clear the configuration
Answer: B
NEW QUESTION # 67
What automatically opens a support case with technical support and collects the PowerEdge MX system state information that is required for troubleshooting an issue, then sends it securely to Dell EMC?
- A. SupportAssist Enterprise
- B. SupportAssist Collections
- C. OpenManage Essentials
- D. OpenManage Enterprise
Answer: A
NEW QUESTION # 68
In addition to one compute sled, one management module, and one IOM, what is the minimum required HW configuration on the PowerEdge MX7000 to POST?
- A. 2 power supply units
4 front cooling fans
5 rear cooling fans - B. 3 power supply units
4 front cooling fans
5 rear cooling fans - C. 1 power supply unit
1 front cooling fan
1 rear cooling fan - D. 1 power supply unit
2 front cooling fans
3 rear cooling fans
Answer: A
NEW QUESTION # 69
Which ports will be active in an MX9116n FSE if there are dual-port NICs in all the server sleds?
- A. even-numbered server-facing ports
- B. server-facing ports 9-16
- C. odd-numbered server-facing ports
- D. server-facing ports 1-8
Answer: C
NEW QUESTION # 70
What are the port specifications of the MX8116n FEM?
- A. Four QSFP56-DD interfaces 16 internal 100 GbE server-facing or 8 internal 25 GbE server-facing
- B. Two QSFP56-DD uplink ports 8 internal 100 GbE server-facing or 16 internal 25 GbE server-facing
- C. Four QSFP56-DD interfaces 8 internal 100 GbE server-facing or 16 internal 25 GbE server-facing
- D. Two QSFP56-DD interfaces 16 internal 100 GbE server-facing or 8 internal 25 GbE server-facing
Answer: B
NEW QUESTION # 71
Which two main components comprise a Scalable Fabric?
- A. MX9116n and the 25GbE PTM
- B. MX7116n and the MX5108n
- C. MX9116n and the MX5108n
- D. MX9116n and the MX7116n
Answer: D
NEW QUESTION # 72
What can be used as the firmware update source for OME-M within an MX chassis?
- A. Dell Update package
System Live Image (SLI) - B. Server Update Utility
System Live Image (SLI) - C. Dell Update Package
Baseline from a Catalog - D. Server Update Utility
Baseline from a Catalog
Answer: C
NEW QUESTION # 73
In the External Fabric Manager OME-M, what programming interface is used to manage the fabric?
- A. Avahi
- B. SFS-C
- C. Pub/Sub
- D. REST-API
Answer: D
NEW QUESTION # 74
After installing a supported OS from a bootable ISO on an MX740c sled, an administrator discovers that not all the hardware is property detected by the OS. They plan to reinstall the OS.
What should the administrator do to resolve this issue through OS installation?
- A. Modify the bootable ISO to remove faulty drivers and boot directly from the bootable ISO
- B. Update the Dell OS Driver Pack and boot directly from the bootable ISO
- C. Update the Dell OS Driver Pack and use the OS Deployment feature
- D. Modify the bootable ISO to remove faulty drivers and use the OS deployment feature
Answer: B
NEW QUESTION # 75
To which two components do the front fans of the MX7000 provide cooling?
(Select 2)
- A. PSUs
- B. IOMs
- C. MMs
- D. Servers
Answer: A,D
NEW QUESTION # 76
What is the minimum OME-M version required to use ATMOS?
- A. 1.60.50
- B. 2.10.00
- C. 2.00.00
- D. 1.40.00
Answer: C
NEW QUESTION # 77
A server sled has a single mezzanine card installed in the correctly supported slot. To which IOM fabric(s) does the sled have access?
- A. Fabric A1 and Fabric B1
- B. Either Fabric A or Fabric B, depending on the configuration set in OME-M
- C. Fabric A1 only
- D. Fabric A1 and Fabric A2
Answer: C
NEW QUESTION # 78
What is the minimum required HW configuration on the PowerEdge MX840c to POST?
- A. 1 processor in socket CPU2
1 memory module installed in socket B1
1 mezzanine card installed in Mezz B1 slot - B. 1 processor in each CPU socket
1 memory module installed per CPU socket
1 mezzanine card installed per CPU Mezz slot - C. 1 processor in any CPU socket
1 memory module installed in any socket
1 mezzanine card installed in any Mezz slot - D. 1 processor in socket CPU1
1 memory module installed in socket A1
1 mezzanine card installed in Mezz A1 slot
Answer: D
NEW QUESTION # 79
A customer is implementing a clustered three-chassis solution.
Which two components are required?
(Select 2)
- A. MX7116n
- B. Pass-Through module
- C. MXG610s
- D. MX9116n
Answer: A,D
NEW QUESTION # 80
Which command(s) is supported in the current PowerEdge MX Redfish implementation?
- A. HEAD and PUT
- B. GET and DELETE
- C. PUT only
- D. PUT and DELETE
Answer: B
NEW QUESTION # 81
A new administrator has just taken over an MX7000 Multi-Chassis Management Group and two-racks of PowerEdge servers. The previous administrator no longer works at the company and is not available.
No one knows the password for the OME-M interface and the default password is not working.
What must be used to reset the password?
- A. Left ear control panel.
- B. RACADM using a serial connection
- C. Management Module jumpers
- D. iDRAC for one of the compute sleds.
Answer: C
NEW QUESTION # 82
......
Authentic Best resources for D-PEMX-DY-23 Online Practice Exam: https://actual4test.practicetorrent.com/D-PEMX-DY-23-practice-exam-torrent.html